A Fresno mold inspection is a detailed check for moisture and growth that produces a written report on where the problem is and what caused it. Texas requires a TDLR mold assessment license for this, and the inspecting company cannot also be the remediator on the same project. Call the number on this page to be connected with a local mold inspector in Fresno.

Fresno conditions
Fresno is an unincorporated community in eastern Fort Bend County, about 17 miles from downtown Houston, on FM 521 at the Brazoria County line. Large subdivisions such as Teal Run, Winfield Lakes, NewPoint Estates and Cambridge Falls were built over former forest and grazing land. Like the rest of the region, homes here contend with hot, humid summers, AC that runs most of the year, heavy rain on clay that drains slowly, and attics full of ductwork that can sweat. Those are the places an inspector will focus on.
In unincorporated Fort Bend County, any work in a floodplain or flood-prone area, and any enclosed structure or slab of 400 square feet or more, including modifications to existing buildings, needs a development permit from Fort Bend County Engineering. The county points residents to FEMA's Flood Map Service Center to check a property. Fort Bend County Health & Human Services lists mold complaints and residential building inspections among the services it does not provide.
Owners and renters: who does what
| Homeowner | Renter | |
|---|---|---|
| Small patch under about 10 sq ft | Can clean it, per EPA, after fixing the moisture | Report the leak or moisture to the landlord in writing |
| Larger or hidden problem | Hire a mold assessment consultant | Ask the landlord to repair; Texas Property Code 92.052 sets a repair duty after proper notice |
| Removal | A separate company holding a TDLR remediation license | Usually arranged by the landlord |
Renter information here is general, not legal advice.

Signs
- Musty air in rooms farthest from the AC unit
- Dark rings around ceiling supply vents
- Peeling paint near windows and sliding doors
- Water marks under the attic air handler
Timing
Schedule an inspection soon after a leak or storm, and before you repaint or replace drywall. Summer, when the AC is working hardest, is when condensation problems are easiest to spot. When you call, you are connected with an independent mold assessment company serving eastern Fort Bend County. The inspector reads moisture in walls and floors, opens the AC return, checks the attic and writes up the findings. If removal is needed, a different company does it, as Texas law requires. Angi's Houston cost data reports inspections averaging $453.
Mold Inspection questions in Fresno
Will Fort Bend County inspect my home for mold?
Should I keep running the AC until the inspector comes?
How do I check that a mold inspector can legally work in Texas?
What indoor humidity should I aim for after the inspection?
More mold services in Fresno
Mold Inspection nearby
Sources
- Wikipedia: Fresno, Texas
- Fort Bend County Engineering: Permits
- Fort Bend County Health & Human Services: Environmental Health service area
- EPA: Mold Cleanup in Your Home
- Tex. Prop. Code 92.052: Landlord's Duty to Repair or Remedy
- TexasLawHelp: Mold and Renter's Rights in Texas
- Angi: Mold inspection and testing cost in Houston, TX
- TDLR: Mold Assessors and Remediators FAQs
- TDLR: License Search
- EPA: A Brief Guide to Mold, Moisture and Your Home
Last updated: